Supero SUPERSERVER 5015A-EHF, User Manual, Page: 72 / 106

6-2
S
UPER
S
ERVER 5015A-EHF User's Manual
Figure 6-2. Chassis Rear View
6-2 Control Panel
The control panel (located on the front of the chassis) must be connected to the
JF1 connector on the serverboard to provide you with system control buttons and
status indicators. These wires have been bundled together in a ribbon cable to
simplify the connection.
Connect the cable from JF1 on the serverboard to the Control Panel PCB (printed
circuit board). Make sure the red wire plugs into pin 1 on both connectors. Pull all
excess cabling out of the airfl ow path. The LEDs inform you of system status. See
Chapter 3 for details on the LEDs and the control panel buttons. Details on JF1
can be found in Chapter 5.
Figure 6-1. Chassis Front View
Control Panel
Power Supply Mouse/Keyboard
USB Ports COM Port VGA Port
Ethernet Ports PCI Slot