Supero SUPERSERVER 2028TP-HC1FR, User Manual

Page: 66 / 140

5-16
SUPERSERVER 2028TP-HC1R/HC1TR/HC1FR USER'S MANUAL
Fan Header
Pin Definitions
Pin# Definition
1 Ground
2 +12V
3 Tachometer
4 PWR Modulation
Fan Headers
This serverboard has two system fan
headers (Fan 3/Fan 4). These 4-pin
fans headers are backward compatible
with traditional 3-pin fans. However, fan
speed control is available for 4-pin fans
only. The fan speeds are controlled by
Thermal Management via the IPMI 2.0
interface. See the table on the right for
pin definitions.
DOM Power Connector
A power connector for SATA DOM (Disk
On Module) devices is located at JSD1.
Connect an appropriate cable here
to provide power for your SATA DOM
devices.
DOM PWR
Pin Definitions
Pin# Definition
1 +5V
2 Ground
3 Ground
SATA DOM + Power Conection
A SATA DOM with power-pin is located at
S-SATA3. Install a SATA device here to
use onboard SATA connections, which
are supported by the Intel PCH.
TPM Header/Port 80
A Trusted Platform Module/Port 80
header is located at JTPM1 to provide
TPM support and Port 80 connection.
Use this header to enhance system
performance and data security. See the
table on the right for pin definitions.
TPM/Port 80 Header
Pin Definitions
Pin # Definition Pin # Definition
1 LCLK 2 GND
3 LFRAME# 4 <(KEY)>
5 LRESET# 6 +5V (X)
7 LAD 3 8 LAD 2
9 +3.3V 10 LAD1
11 LAD0 12 GND
13 SMB_CLK 14 SMB_DAT
15 +3V_DUAL 16 SERIRQ
17 GND 18 CLKRUN# (X)
19 LPCPD# 20 LDRQ# (X)