Supero SuperServer 2026TT-DLIBQRF, User Manual

Page: 63 / 104

Chapter 6: Advanced Chassis Setup
6-5
Installing/Removing Hot-swap Drives
To remove a carrier, push the release button located beside the drive LEDs. 1.
Swing the handle fully out and use it to pull the unit straight out (see Figure 2.
6-4).
Be aware that powering down a node will power down all the hard drives
that are logically associated with it (as shown in Figure 6-6).
!
Figure 6-3. Mounting a Hard Drive in a Carrier