Supero SUPER X5DA8, User Manual

Page: 47 / 92

Chapter 2: Installation
2-17
Onboard Audio Enable/
Disable (not on X5DAL-G/
X5DAL-TG2)
AC'97 brings high quality audio to
PCs. When enabled with JP40, audio
is processed onboard. The disabled
setting should be selected when you
wish to use an PCI add-on card for
audio. See the table at right for
jumper settings.
Jumper
Position
1-2
2-3
Definition
Enabled
Disabled
AC97 Enable/Disable
Jum per Settings (JP40)
SCSI Channel Termination
Enable/Disable (X5DA8)
Jumpers JPA1 and JPA2 allow you
to enable or disable termination for
each SCSI channel. Jumper JPA1
controls channel A and JPA2 con-
trols channel B. The default setting
is open to enable (teminate) both
SCSI channels. If you wish to con-
nect external SCSI devices, you
should disable termination for the
channel(s) you will be connecting
them to. See the table on the right
for jumper settings.
Jumper
Position
Open
Closed
Definition
Enabled
Disabled
SCSI Channel T ermination
Enable/Disable
Jumper Settings
(JPA1, JPA2)
Serial ATA Enable/Disable
(X5DAL-TG2)
Jumpers JPA1 and JPA2 allow you
to enable or disable the Serial ATA
headers. Jumper JPA1 is for head-
ers #1 and #2 and JPA2 is for head-
ers #3 and #4. The default setting
is pins 1-2 to enable all four head-
ers. See the table on the right for
jumper settings.
Jumper
Position
Pins 1-2
Pins 2-3
Definition
Enabled
Disabled
Serial AT A Enable/Disable
Jumper Settings
(JPA1, JPA2)