Supero Series3800/S120T, User Manual

Page: 11 / 118

1-3
Chapter 1: Introduction
Onboard Controllers/Ports
One fl oppy drive connector and one onboard ATA/100 connector are provided to
support IDE hard drives or ATAPI devices. The color-coded rear I/O ports include
two COM ports, one parallel port, four USB 2.0 ports, PS/2 mouse and keyboard
ports, two gigabit Ethernet ports and HDA (High Defi nition Audio) ports.
Other Features
Other onboard features that promote system health include onboard voltage moni-
tors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU
overheat sensors, virus protection and BIOS rescue.
1-3 Server Chassis Features
The SuperWorkstation 7045A-C3/7045A-CT is a scaleable server platform designed
with today's most state-of-the-art features. The following is a general outline of the
main features of the SC743TQ-865-SQ server chassis.
System Power
The 7045A-C3/7045A-CT features a single 865W power supply. This power supply
unit has been designed to operate at a low noise level to make it ideal for use in
a workstation environment.
SAS Subsystem
The SC743TQ-865-SQ chassis was designed to support eight SAS hard drives,
which are hot-swappable units (7045A-C3 only).
SATA Subsystem
The SC743TQ-865-SQ supports up to six 3 Gb/s Serial ATA drives. The SATA
drives are hot-swappable units and are connected to a backplane that provides
power and control.
Front Control Panel
The control panel on the SuperWorkstation 7045A-C3/7045A-CT provides you with
system monitoring and control. LEDs indicate system power, HDD activity, network
activity, overheat conditions and power supply failure. A main power button and a
system reset button are also included.
Note: the power supply fail LED indicates the power supply fan has failed.