4-19
Chapter 4 Chassis Setup and Maintenance
4-10 Changing the CD-ROM, DVD-ROM, or Floppy Drive
and HDD trays
The SC748 chassis supports the following drive configuration options:
Options
Position A
Position B
Position C
Option One
Floppy, DVD or
CD-ROM drive
Not available
One 3.5" fixed
hard drive or two
2.5" fixed hard
drives
Option Two
Not available
3.5" fixed hard
drive
3.5" fixed hard
drive
Option Three
Floppy, DVD or
CD-ROM drive
Not available
Open for later use
Option Four
Open for later use
if no drive is in
position B
Open for later use
if no drive is in
position A
3.5" fixed hard
drive
After selecting one of the drive configuration options listed above, use the following
instructions to install the drives and their trays into the chassis.
Changing Drive Trays
Power down and unplug the system from the outlet.
Remove the chassis cover.
Disconnect the power and data cables from the drive to other chassis compo-
nents including the motherboard and backplane.
1.
2.
3.
Figure 4-21: Drive Location Options
A
B
C
