Supero SC743i-465, User Manual

Page: 24 / 94

SC743 Chassis Manual
4-4
4-4 Installing Fixed Hard Drives in SC743i Series
Chassis Models
Disconnecting the Chassis from the Power Source
Turn off all peripheral devices and turn off the power supply to the SC743. 1.
Disconnect the AC power cord from the system. 2.
Disconnect all cables and label the cables for easy identification. 3.
Open the chassis cover as described in section 4-2. 4.
Disconnect the wiring which the hard drive to either the motherboard or the 5.
expansion card of the motherboard, depending upon your chassis model.
Unlock and open the drive tray door as shown. 6.
Press the release tab located on the drive tray door to release the drive tray 7.
from its locking position.
Lift up the drive tray handle. 8.
Pull the drive tray door downward and pull the drive tray out from the chassis. 9.
(Note: The orientation of the picture shown below is for rack mount systems.)
1
6
1
7
1
9
1
8
1
4
Figure 4-3: Removing Hard Drive Trays