SC101i Chassis Manual
5-2
5-3 Removing the Chassis Cover
1. Power down the system as described in section 5-2.
2. Remove the two side screws that hold the chassis cover in place and set
these aside for later use.
3. Slide the cover sideways as illlustrated above to release the front and rear
cover hooks from the chassis.
4. Lift the cover up and off the chassis.
Caution:
Except for short periods of time, do
not
operate the server without the
cover in place. The chassis cover must be in place to allow proper airflow and
prevent overheating
.
Figure 5-1: Removing the Chassis Cover
3
2
4
Cover Hook
Cover Hook