PDSG4/PDSGE
User's Manual
4-6
4-4.2 Advanced Chipset Control
*
Warning
: Take caution when changing the Advanced Chipset
settings. An incorrect setting, a very high DRAM frequency, or an
incorrect timing may cause the system to become unstable. When
this occurs, reset the setting to the default setting.
DRAM Timing Select
This setting allows you to set the Timing for DRAM slots. The options are Manual
and
By SPD
.
DRAM Data Integrity Mode
This setting allows you to set the Data Integrity Mode for DRAM slots. The
options are Non-ECC, and
ECC
.
PEG Force X1
Enable this option to force the PCI-E x16 slot to function as a PCI-E x1 slot.
The options are
Disabled
and Enabled.
SATA Mode
This setting allows you to select the serial ATA Mode for the system. The options
are
IDE,
RAID, and APCI.
On-Chip Serial ATA
Select Disabled to disable the SATA Controller. Select
Auto
to allow the BIOS
to make arrangements automatically. Select Combined Mode to use the PATA
and SATA Combined Mode. The maximum of 2 IDE drives in each channel is
allowed. Select
Enhanced
Mode to enable both SATA and PATA. This mode
will support up to 6 IDE drives. Select SATA Only to allow SATA to operate
in Legacy Mode.
PATA IDE Mode
This feature allows you to select the channel for the PATA IDE mode. The options
are
Primary
and Secondary.
SATA Port
This feature allows you to set the mode for SATA ports. The default setting is
"P1, P3 is Secondary."
AC97 Auto Select
This feature allows the user to select AC97 functions. The options are
Auto,
AC97 Audio Only, AC97 Modem Only and All Disabled.
USB Controller
This setting allows you to enable or disable the USB Controller. The options are
Enabled
, and Disabled.
