Chapter 4: BIOS
4-13
Mark All Events as Read
Highlight this item and press <Enter> to mark all events as read.
Clear Event Log
Select Yes and press <Enter> to clear all event logs. The options are Yes and
No to verify.
Console Redirection
Remote Access
Allows you to Enable or
Disable
remote access. If enabled, the settings below
will appear.
Serial Port Number
Selects the serial port to use for console redirection. Options are
COM1
and
COM2.
Serial Port Mode
Selects the serial port settings to use. Options are
(115200 8, n, 1)
, (57600 8,
n, 1), (38400 8, n, 1), (19200 8, n, 1) and (09600 8, n, 1).
Flow Control
Selects the fl ow control to be used for console redirection. Options are
None,
Hardware and Software.
Redirection After BIOS POST
Options are Disable (no redirection after BIOS POST), Boot Loader (redirection
during POST and during boot loader) and
Always
(redirection always active).
Note that some OS's may not work with this set to Always.
Terminal Type
Selects the type of the target terminal. Options are
ANSI
, VT100 and VT-
UTF8.
VT-UTF8 Combo Key Support
Allows you to
Enable
or Disable VT-UTF8 combination key support for ANSI/
VT100 terminals.
