Chapter 4: BIOS
4-3
Wait for F1 if Error
This setting controls the system response when an error is detected during the
boot sequence. When enabled, BIOS will stop the boot sequence when an error
is detected, at which point you will need to press the F1 button to re-enter the
BIOS setup menu. The options are
Enabled
and Disabled.
Hit 'DEL' Message Display
Use this option to
Enable
or Disable the "Press DEL to run setup" message in
POST.
Watch Dog Function
This option allows the system to restart when it is not active more than 5 minutes.
Options are Enabled or
Disabled
.
Power Mode Button
This option selects the Power Button functionality. Options are
Instant Off
or
4-seconds Override.
Restore on AC Power Loss
This setting allows you to choose how the system will react when power returns
after an unexpected loss of power. The options are Power Off, Power On and
Last State
.
Interrupt 19 Capture
Select Enabled to allow ROMs to trap Interrupt 19. The options are
Enabled
and Disabled.
Processor and Clock Options
CPU Confi guration
This displays static information on the Module Version, AGESA Version, Physical
Count and Logical Count for the system's processor(s) and clock.
CPU Information
This setting is used to select which physical CPU's information to display. Options
include
Processor 0
or Processor 1. The information for the selected processor
includes Processor number, Revision, Cache L1/L2/L3, Speed, NB CLK, Able to
Change Frequency and uCode Patch Level.
Note:
Zero is always the "Boot Strap Processor" or main CPU with all others
being "Application Processors".
