5-5
Chapter 5: Chassis Setup and Maintenance
Installing the Hard Drive
The motherboard should be installed before installing the hard drive.
1. If necessary, power down the system as described in section 5-2 and remove
the chassis cover.
2. Remove the two screws securing the hard drive tray to the support bracket
and set them aside for later use. Lift the tray out.
3. Place the hard drive into the tray and secure it to the tray with the screws
provided with hard drive.
4. Return the hard drive tray assembly into the chassis, aligning the tabs of
the tray with the slots in the chassis. Secure the tray to the chassis support
bracket with the screws previously set aside.
5. Reinstall the chassis cover and power up the system.
5-5 Installing the Hard Drive
The SC101i uses a fixed 2.5" hard drive. It is installed into a mounting tray.
Figure 5-4: Installing the Hard Drive
