2-4
BPN-SAS2-216EL1/EL2 Backplane User's Guide
General Jumper Settings
Jumper
Jumper Settings
Note
PRI_MODE1
Pins 2-3
Factory setting, do not change
PRI_MODE2
Pins 2-3
Factory setting do not change
REMOTE_FAN_FAIL1
Open: Enable (Default)
Closed: Disable
Enables/disables the fan speed
reporting.
REMOTE_FAN_FAIL2
Open: Enable
Closed:Disable (Default)
Enables/disables the FANFAIL1 LED
BUZZER_ENB1
Open: Disable (Default)
Closed: Enable
Buzzer enable*
*The buzzer sound indicates that a condition requiring immediate attention has
occurred.
The buzzer alarm is triggered by any of the following conditions:
1. Hard drive failure
2. Fan failure
3. System temperature over 45º Celsius.
