6-14
AOC-USASLP-H8iR Add-on Card User's Guide
Click
10.
Accept
to accept the configuration of the new virtual disk.
Note:
Click the Reclaim button if you want to undo a virtual disk that you just
defined.
Click
11.
Next
to continue with the next configuration step. The Virtual Disk Sum
-
mary window appears.
Review the configuration shown in the window. If you want to change some
-
12.
thing, click
Back
and change the configuration parameters.
Click
13.
Finish
to accept the configuration and start the initialization process
(unless you selected No Initialization earlier).
Using Manual Configuration: RAID 50
Follow these steps to create a RAID 50 storage configuration using the Manual
Configuration mode of the Configuration Wizard:
Creating a RAID 50 Storage Configuration
In the first
1.
Manual Configuration
window, shown in Figure 6-5, select two
available drives in the left panel. Click the Right Arrow button to move the
selected drives to the right panel.
Click
2.
Accept
to accept these drives for a new RAID 5 array.
Select two more drives for a second RAID 5 array, and click
3.
Accept
.
To add a hotspare, select an available drive in the left panel. Select the array
4.
from the drop-down menu, and click Add Hotspare To, as shown in Figure
6-7.
To remove a hotspare from an array, select it in the right panel and click
5.
Remove HotSpare
.
Click
6.
Next
.
The next
Configuration Wizard
window appears, as shown in Figure 6-6.
The
Arrays with Free Space
menu lists the new arrays that you just defined,
plus any existing arrays with holes (free space) that could be used for a new
configuration.
