4-16
A1SA2-2750F User’s Manual
PCIe/PCI/PnP Configuration
This feature allows the user to set the PCI/PnP configurations for the following items:
VGA Palette Snoop
Select Enabled to support VGA palette register snooping which will allow the a
PCI card that does not contain its own VGA color palette to examine the palette
of a video card and mimic it for proper color display. The options are
Disabled
,
and Enabled.
PERR# Generation
Select Enabled to allow a PCI device to generate a PERR number for a PCI/PCI-E
parity error (PERR) event. The options are
Disabled
and Enabled.
SERR# Generation
Select Enabled to allow a PCI device to generate an SERR (System-Error) number
for a PCI Bus Signal Error Event. The options are Enabled and
Disabled
.
Above 4G Decoding
Select Enabled for a 64-bit device to be decoded above the 4GB address space If
this function is supported by the system. The options are
Disabled
and Enabled.
Storage
This feature allows the user to determine how the system handles UEFI and Legacy
Storage OpROM instructions. The options are Do not Launch,
UEFI
, and Legacy.
Onboard LAN1 Option ROM/Onboard LAN2 Option ROM
This feature allows the user to configure the Option ROM (OPROM) setting for a
PCI-E slot specified by the user. Option ROM allows the computer to bootup using
a device installed on the slot specified. Select iSCSI to use the iSCSI Option ROM
to boot the computer using an iSCSI device installed in a LAN port specified.
Select PXE (Preboot Execution Environment) to boot the computer using a PXE
device installed in a LAN port specified. Select Disabled to prevent system boot
using a device installed in a LAN port. The options are Onboard LAN1 Option
ROM are Disabled,
PXE
and iSCSI. The options for Onboard LAN2 Option ROM
are
Disabled
and PXE.
Network Stack
Select Enabled to enable UEFI (Unified Extensible Firmware Interface) for network
stack support. The options are Enabled and
Disabled
.
