Supero 7047AX-72RF, User Manual

Page: 20 / 135

Chapter 2: Workstation Installation
2-7
Figure 2-2. Identifying the Inner Rails and Chassis Handles
Chassis Handle
Inner Rails
Installing the Chassis Handles and Inner Rails
Installing the Inner Rails
1. Locate the chassis handles and handle screws.
2. Align the chassis handle with the front of the chassis and secure with the
three chassis handle screws.
3. Repeats steps 1 and 2 with the other handle.
4. Locate the inner rails and screws in the shipping package.
5. Align the inner rails against the chassis, as shown. Confirm that the rails are
flushed against the edge of the chassis.
6. Tighten the screws. Do not over-tighten.
7. Repeat steps 5 and 6 with the other inner rail.