Supero 6027R-E1R12N, User Manual

Page: 93 / 112

Chapter 7: BIOS
7-19
Option ROM is Enabled , and the default settings for LAN2 Option ROM~LAN4
Option ROM are Disabled .
VGA Priority
This feature allows the user to select the graphics adapter to be used as the primary
boot device. The options are Onboard VGA , and Add-on VGA.
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unifi ed
Extensible Firmware Interface) for network stack support. The options are Enabled
and Disabled .

Serial Port 1 Confi guration/Serial Port 2 Confi guration
Serial Port
Select Enabled to enable a serial port specifi ed by the user. The options are En-
abled and Disabled.
Device Settings
This feature indicated if reset is required or not for a serial port specifi ed.
Change Settings
Use this feature to set the optimal Environment_Control_Interface (PECI) setting for
a serial port specifi ed. The default setting is Auto , which will allow the AMI BIOS
to automatically select the best setting for the PECI platform.
Device Mode
Use this feature to select the desired mode for a serial port specifi ed. The options
are Normal and High Speed.

Serial Port Console Redirection
•
COM 0/COM1
These two submenus allow the user to confi gure the following Console Redirection
settings for a COM Port specifi ed by the user.
Console Redirection
Select Enabled to use a COM Port selected by the user for Console Redirection.
The options are Enabled and Disabled.