![background image](http://html.mh-extra.com/html/supernova/mod-1614d/mod-1614d_assembly-instructions_1404906005.webp)
© 2022
Step 1 of 1
Order #XXXXX
Locked layer contains
placeholder marks.
FRONT VIEW
Assemble frame flat on ground.
1
2
7
7A
8
8A
9
9A
10
10A
3
4
5
6
2A
3A
4A
5A
6A
1
1
Item
1
2/2A
3/3A
4/4A
5/5A
6/6A
7/7A
8/8A
9/9A
10/10A
Qty.
3
1/1
1/1
1/1
1/1
1/1
1/1
1/1
1/1
1/1
Description
Base Plate
47.5” CEI152 Horizontal Extrusion
45” CEI152 Horizontal Extrusion
45” CEI152 Horizontal Extrusion
45” CEI152 Horizontal Extrusion
47.5” CEI152 Horizontal Extrusion
47.5” CEI152 Vertical Extrusion
45.677” Z33 Vertical Extrusion
45.677” Z33 Vertical Extrusion
47.5” CEI-152 Vertical Extrusion
Completed Assembly
Steps:
Refer to the CEI152 Frame Assembly general information page.
1) Assemble horizontals [2-3-4-5-6], [2A-3A-4A-5A-6A] &
verticals [7-7A], [8-8A], [9-9A], [10-10A] using straight connectors.
2) Connect vertical assemblies [7/7A], [10/10A] between horizontal
assemblies [2/3/4/5/6], [2A/3A/4A/5A/6A] using corner connectors.
4) Attach verticals [8/8A], [9/9A] between horizontal assemblies.
5) Connect Base Plates [1] to Horizontals [2,4,6], using bolts.
6) Attach power cords to Supernova lights as shown.
7) Attach PR63 conduit to extrusions for wire managment.
See
PR63 Attachment
detail.
8) Apply SEG Graphics to assembled frame.
Refer to the SEG Installation
general information page.
Power
Break
Power
Break
Power
Break
Power
Break
Transformer
Transformer
Transformer
Transformer
pinch
PR63 Attachment
1) Run cords through
PR63 plastic conduit.
2) Attach conduit by
pinching the opening
& inserting into the
groove of extrusion.
PR63 conduit
+
+
-
-
Lights
Male
Light to Light Attachment
Maximum of 7 lights per chain,
11 lights per Transformer
Light to Transformer Attachment
+
-
Power
Female
Transformer
144W / 6 Amp / 24V
Backwall Assembly