4-16
X7DWT-INF User's Manual
Mode
This setting allows you to set the type of device that will be connected to serial
port B. The options are
Normal
and IR (for an infrared device).
Base I/O Address
This setting allows you to select the base I/O address for serial port B. The options
are 3F8,
2F8
, 3E8 and 2E8.
Interrupt
This setting allows you to select the IRQ (interrupt request) for serial port B. The
options are
IRQ3
and IRQ4.
DMI Event Logging
Access the submenu to make changes to the following settings.
Event Log Validity
This is a display to inform you of the event log validity. It is not a setting.
Event Log Capacity
This is a display to inform you of the event log capacity. It is not a setting.
View DMI Event Log
Highlight this item and press <Enter> to view the contents of the event log.
Event Logging
This setting allows you to
Enable
or Disable event logging.
ECC Event Logging
This setting allows you to
Enable
or Disable ECC event logging.
Mark DMI Events as Read
Highlight this item and press <Enter> to mark the DMI events as read.
Clear All DMI Event Logs
Select Yes and press <Enter> to clear all DMI event logs. The options are Yes
and
No
.
