Supermicro X7DB8-X User Manual Download Page 105

Page: 105 / 131

Appendix C: Intel HostRAID Setup Guidelines

C-9

Resetting to Non-RAID and Resetting a RAID HDD

a. From the main menu, select item3-Reset Disks to Non- RAID, and press <Enter>.

The following screen will appear:

b. Use the <Up Arrow>, <Down Arrow> keys to highlight the RAID set drive to reset

and press <Space> to select.

c. Press <Enter> to reset the RAID set drive. A Warning message displays.

d. Press "Y" to reset the drive, or type "N" to go back to the main menu.

Exiting the Intel Matrix Storage Manager Utility:

a. From the main menu, select item4-Exit, and press <Enter>. A warning message

will appear.

b. Press "Y" to reset the drive, or type "N" to go back to the main menu.

Warning:

Be cautious when you reset a RAID volume HDD to non-

RAID or Resetting a RAID HDD. Resetting a RAID volume HDD or

Resetting a RAID HDD will reformat the HDD and delete the internal

RAID structure on the drive.

Summary of Contents for X7DB8-X




































































































































Search results

Summary of Contents for X7DB8-X

Reviews:

Related manuals for X7DB8-X

Brands by name

Popular brands

Supermicro X7DB8-X, User Manual

Search results

Summary of Contents for X7DB8-X

Reviews:

Related manuals for X7DB8-X

Brands by name

Popular brands