Super X12SPO-NTF/F User's Manual
122
Default Options
Load Optimized Defaults
To set this feature, select Restore Defaults from the Save & Exit menu and press <Enter>.
These are factory settings designed for maximum system stability, but not for maximum
performance.
Save As User Defaults
To set this feature, select Save as User Defaults from the Save & Exit menu and press
<Enter>. This enables you to save any changes to the BIOS setup for future use.
Restore User Defaults
To set this feature, select Restore User Defaults from the Save & Exit menu and press <Enter>.
Use this feature to retrieve user-defined settings that were saved previously.
Boot Override
This feature allows you to override the Boot priorities sequence in the Boot menu, and
immediately boot the system with a device specified instead of the one specified in the boot
list. This is an one-time override.
(B1/D0/F0) UEFI PXE IPv4: Intel(R) Ethernet Controller X550 (MAC:xxxxxxxxxxxx)
(B1/D0/F1) UEFI PXE IPv4: Intel(R) Ethernet Controller X550 (MAC:xxxxxxxxxxxx)
(B1/D0/F0) UEFI PXE IPv6: Intel(R) Ethernet Controller X550 (MAC:xxxxxxxxxxxx)
(B1/D0/F1) UEFI PXE IPv6: Intel(R) Ethernet Controller X550 (MAC:xxxxxxxxxxxx)
UEFI: Built-in EFI Shell
Launch EFI Shell from filesystem device
