Chapter 4: BIOS
79
Re-try Boot
If this feature is enabled, the BIOS will automatically reboot the system from a specified boot
device after its initial boot failure. The options are
Disabled
, Legacy Boot, and EFI Boot.
Power Configuration
Watch Dog Function
If enabled, the Watch Dog Timer will allow the system to reset or generate NMI based on
jumper settings when it is expired for more than five minutes. The options are
Disabled
and
Enabled
.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Stay Off for
the system power to remain off after a power loss. Select Power On for the system
power to be turned on after a power loss. Select Last State to allow the system to
resume its last power state before a power loss. The options are Stay Off, Power On,
and
Last State
.
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select 4
Seconds Override for the user to power off the system after pressing and holding the power
button for four seconds or longer. Select Instant Off to instantly power off the system as soon
as the user presses the power button. The options are
Instant Off
and
4 Seconds Override
.
Connectivity Configuration
This submenu becomes configurable when a CNVi device is plugged into the motherboard.
CNVi present
This feature displays the status of wireless connections.
CNVi Configuration
CNVi WiFi&BT
Use this feature to enable CNVi WiFi and Bluetooth support. The options are Disabled and
Enabled
.
CPU Configuration
The following CPU information will display:
•
CPU Signature
•
Microcode Patch
