Super X11SRL-F User's Manual
80
RSA Support
Use this feature to enable Rack Scale Architecture (RSA) support. The options are
Disabled
and Enabled.
SATA and RST Configuration
When this submenu is selected, the AMI BIOS automatically detects the presence of the
SATA devices that are supported by the Intel PCH chipset and displays the following features:
SATA Controller(s)
This feature enables or disables the onboard SATA controller supported by the Intel PCH
chipset. The options are
Enabled
and Disabled.
Configure SATA as
Select AHCI to configure a SATA drive specified by the user as an AHCI drive. Select RAID
to configure a SATA drive specified by the user as a RAID drive. The options are
AHCI
and
RAID.
Aggressive Link Power Management
When this feature is enabled, the SATA AHCI controller manages the power usage of the
SATA link. The controller will put the link in a low power mode during extended periods of I/O
inactivity, and will return the link to an active state when I/O activity resumes. The options
are Disabled and
Enabled
.
Storage Option ROM/UEFI Driver
This feature controls which option ROM to execute for the storage device. The options are
Disabled, EFI, and
Legacy
.
Serial ATA Port 0~7
This feature displays the information detected on the installed SATA drive on the particular
SATA port.
•
Model number of drive and capacity
•
Software Preserve Support
Port 0~7 Hot Plug
Set this feature to Enable for hot plug support, which will allow the user to replace a SATA
drive without shutting down the system. The options are Disabled and
Enabled
.
Port 0~7 Spin Up Device
On an edge detect from 0 to 1, set this feature to allow the PCH to initialize the device.
The options are
Disabled
and Enabled.