manualshive.com logo in svg

Supermicro X11DPT-L, User Manual

Share
Download
Supermicro X11DPT-L User Manual Download Page 76

 X11DPT-L User's Manual

76

VMD Config for PStack2

Intel® VMD for Volume Management Device

Select Enable to use the Intel Volume Management Device Technology for this stack. 

The options are 

Disable

 and Enable. 

*If the feature "Intel VMD for Volume Management Device" is set to Enable, the 
following features will be available:

CPU1 SLOT1 PCI-E 3.0 X4 (IN X8) VMD (Available when the device is 

detected by the system)

Select Enable to use the Intel Volume Management Device Technology for this spe

-

cific root port. The options are 

Disable

 and Enable

CPU1 SLOT2 PCI-E 3.0 X8 VMD (Available when the device is detected by 

the system)

Select Enable to use the Intel Volume Management Device Technology for this spe

-

cific root port. The options are 

Disable

 and Enable.

Hot Plug Capable (Available when the device is detected by the system)

Use this feature to enable hot plug support for PCIe root ports 3A~3D. This will allow 

the user to replace the components without shutting down the system. The options 

are 

Disable

 and Enable.

Intel® VMD for Volume Management Device on CPU2

VMD Config for PStack2

Intel® VMD for Volume Management Device

Select Enable to use the Intel Volume Management Device Technology for this stack. 

The options are 

Disable

 and Enable. 

*If the feature "Intel VMD for Volume Management Device" is set to Enable, the 

following features will be available:

CPU2 SLOT3 PCI-E 3.0 X16 VMD (Available when the device is detected by 

the system

Select Enable to use the Intel Volume Management Device Technology for this spe

-

cific root port. The options are 

Disable

 and Enable.

Hot Plug Capable (Available when the device is detected by the system)

Use this feature to enable hot plug support for PCIe root ports 3A~3D. The options 

are 

Disable

 and Enable.

II0-PCIE Express Global Options

PCI-E Completion Timeout Disable

Use this feature to enable PCI-E Completion Timeout support for electric tuning. The 

options are Yes, 

No

, and Per-Port.

Summary of Contents for X11DPT-L











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands