Chapter 4: AMI BIOS
4-21
PCI Devices Option ROM Settings
CPU2 PCI-E 3.0x8 Slot1 OPROM/CPU2 PCI-E 3.0x16 Slot2 OPROM/CPU2
PCI-E 3.0x16 Slot3 OPROM/CPU1 SAS AOM1 (Add-On Module#1) Slot4
OPROM/CPU1 SIOM Card Slot5 OPROM
Select Enabled to enable Option ROM support to boot the computer using a de-
vice installed on the slot specified by the user. The options are Disabled,
Legacy
,
and EFI.
Onboard NVMe1 Option ROM/Onboard NVMe2 Option ROM/Onboard Video
Option ROM
Select Enabled to enable Option ROM support to boot the computer using a de-
vice installed on the slot specified by the user. The options are Disabled and
EFI
.
VGA Priority
Use this item to select the graphics device to be used as the primary video display
for system boot. The options are
Onboard
and Offboard.
Onboard LAN1 Option ROM/Onboard LAN2 Option ROM
Use this option to select the type of device installed in LAN Port1 or LAN Port2
for system boot. The default setting for LAN1 Option ROM is
PXE
, and for LAN2
Option ROM is
Disabled
.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Uni-
fied Extensible Firmware Interface) for network stack support. The options are
Enabled and
Disabled
.
IPv4 PXE Support (Available when Network Stack is set to Enabled)
Set this item to Enabled to activate IPv4 PXE Support. The options are
Enabled
and Disabled.
IPv6 PXE Support (Available when Network Stack is set to Enabled)
Set this item to Enabled to activate IPv6 PXE Support. The options are Enabled
and
Disabled
.
Super IO Configuration
Super IO Chip AST2400
Serial Port 1 Configuration
Serial Port 1
Select Enabled to enable the onboard serial port specified by the user. The options
are
Enabled
and Disabled.
