2-24
X10DRT-PS Motherboard User’s Manual
1
1
JUSB1
JBAT1
LE6
S-SATA3
JSM2
JSM1
JPME2
JVRM1
JVRM2 JPG1 JPB1
JWD1
UID_LED1
BMC_HB_LED1
PLD1
JF1
JTPM1
JSD1
JBT1
SXB1
SLOT2
BIOS
LICENSE
X10DRT-PS
REV:1.00
JUIDB1
SIOM
SIOM:CPU1 PCI-E 3.0 X16
CPU2 PCI-E 3.0 X16
S-SA
TA0~2
TPM/POR
T80
CPU2 SLOT1 PCI-E 3.0 X16COM1
IPMI_LAN
P2-DIMMF1
P2-DIMME2
P2-DIMME1
P2-DIMMF2
BATTERY
USB0/1(3.0)
BIOS
FLASH
BMC
UID SW
VGA
CPU2_VRM_HS1
P2-DIMMG2
P2-DIMMH1
P2-DIMMH2
P2-DIMMG1
CPU2 SLOT2
PCI-E 3.0 X8
I-SA
TA0~5
CPU1 PCI-E 3.0 X8
P1-DIMMC1 P1-DIMMC2 P1-DIMMD1 P1-DIMMD2
P1-DIMMA1
P1-DIMMA2
P1-DIMMB1
P1-DIMMB2
CPU1
CPU2
1
1
PCH
SXB2
Bar Code
A.
VGA Enabled
B.
BMC Enabled
VGA Enable
Jumper JPG1 allows the user to enable
or disable the onboard VGA connector.
The default setting is 1-2 to enable the
connection. See the table on the right
for jumper settings.
VGA Enable
Jumper Settings
Jumper Setting Definition
1-2
Enabled (Default)
2-3
Disabled
BMC Enable
Jumper JPB1 allows you to enable the
onboard BMC (Baseboard Management)
Controller) to provide IPMI 2.0/KVM
support on the motherboard. Be sure to
remove the power cord before closing
pins 2-3 to disable the BMC. See the
table on the right for jumper settings.
BMC Enable
Jumper Settings
Jumper Setting Definition
Pins 1-2
BMC Enable (Default)
Pins 2-3
BMC Disable
A
B
