Chapter 1: Overview
1-5
X10DRT-PS Motherboard Jumpers
Jumper
Description
Default Setting
JBT1
Clear CMOS
See Chapter 2
JPB1
Baseboard Management Controller (BMC)
Enable
Pins 1-2 (Enabled)
JPG1
VGA Enable
Pins 1-2 (Enabled)
JPME2
Manufacture (ME) Mode Select
Pins 1-2 (Normal)
JVRM1/2 I2C Bus for VRM 1/2
1-2 BMC, 2-3:PCH
JWD1
Watch Dog Timer Enable
Pins 1-2 (RST)
X10DRT-PS Motherboard Connectors
Connectors
Description
Battery
Onboard CMOS battery (See more info in Chapter 3)
COM1
COM port header
JF1
SMC proprietary front control panel header
JSD1
SATA DOM (Device_On_Module) power connector
JTPM1
TPM (Trusted Platform Module)/Port 80
IPMI_LAN
IPMI_Dedicated LAN connector
SIOM
CPU1 PCI-E 3.0 x 16 slot for proprietary add-on module use
S-SATA3
SATA DOM (Disk-On-Module) with power-pin connector
(CPU2) Slot1
PCI-E 3.0 x16 Slot supported by CPU2
(CPU2) Slot2
PCI-E 3.0 x8 Slot supported by CPU2
SXB2
I-SATA 0-5/PCI-E 3.0 x8 Slot supported by CPU1
SXB1
S-SATA 0-2/PCI-E 3.0 x16 Slot supported by CPU2
UID SW
UID (Unit Identifier) Switch (JUIDB1)
USB0/1 (3.0)
Back Panel USB 3.0 Ports 0/1
VGA
Backpanel VGA Port
X10DRT-PS Motherboard LED Indicators
LED
State
LE6
Orange: Standby power ready
Green: All power RAMP normal
Red: One or more power regulators failed
BMC_HB_LED1 (BMC Heartbeat LED) Green (Blinking): BMC normal
UID LED1 (Unit_Identifier LED)
Blue: (On/Blinking) Unit identified
JPME2
Manufacture Mode (ME) Select Pins 1-2 (Normal)
