1-8
X10DRT-P/PT/PIBQ/PIBF Motherboard User’s Manual
IPMI 2.0
•
IPMI 2.0 supported by the ASpeed 2400 BMC
Serial (COM) Port
•
One (1) Fast UART 16550 connection header
VGA
•
Rear VGA Port
Peripheral
Devices
USB Devices
•
Two (2) USB ports on the rear I/O panel (USB 3.0)
Ports USB 0/1
BIOS
•
16 MB AMI SPI BIOS Flash ROM
•
DMI 2.3, PCI 2.3, ACPI 2.0/3.0/4.0, USB Keyboard,
Plug & Play (PnP), UEFI 2.3.1, and SMBIOS 2.7
or later,
Power
•
ACPI Power Management
•
Power-on mode for AC power recovery
•
Intel
®
Intelligent Power Node Manager (available
when the NMView utility is installed)
•
Management Engine
•
Riser Card auto-detection
System
Health
System Health Monitoring
Monitoring
•
Onboard system health monitors for 12V, +3.3V, +5V,
Vcpu, Vdimm (DDR4 DIMM voltage), chipset voltage,
and battery voltage.
•
CPU 5-Phase switching voltage regulator
•
CPU/System overheat LED and control
•
CPU Thermal Trip support
•
Thermal Monitor 2 (TM2) support
Fan Control
•
Fan status monitoring with firmware 4-pin fan speed
control
•
Low noise fan speed control
LED Indicators
•
BMC (BaseBoard Management) LED
•
InfiniBand LED
•
UID/Remote UID LED
