Supermicro SuperWorkstation SYS-730A-I, User Manual, Page: 28 / 111

28
Chapter 3: Maintenance and Component Installation
Lever
1. Locate the lever on the CPU socket and press the lever down as shown below.Using
2. Using Pin 1 as a guide, carefully align the CPU keys (A & B) on the processor against
the CPU keys on the carrier (a & b) as shown in the drawing below.
3. Once they are properly aligned, carefully place one end of the processor into the latch
marked 1 on the carrier, and place the other end of processor into the latch marked 2
1
2
A
B
Latch
Latch
a
CPU Key (on the
processor)
CPU Key (on the
carrier)
CPU Key (on the
processor)
CPU Key (on
the carrier)
b