66
SuperWorkstation 5039A-IL User's Manual
PCH SLOT7 PCI-E 3.0 X1
Port 8 ASPM
Use this item to set the Active State Power Management (ASPM) level for a PCI-E device.
Select Auto for the system BIOS to automatically set the ASPM level based on the system
configuration. Select Disabled to disable ASPM support. The options are Disabled, L0s,
L1, L0s & L1, and
Auto
.
Port 8 L1 Substates
Use this feature to configure the PCI Express L1 Substates. The options are Disabled,
L1.1, L1.2, and
L1.1 & L1.2
Port 8 PCIe Speed
Use this feature to select the PCI Express port speed. The options are
Auto
, Gen1, Gen2,
and Gen3.
Port 8 Detect Non-Compliant Device
Select Enabled for the AMI BIOS to automatically detect a PCI-E device that is not compliant
with the PCI-E standards. The options are
Disabled
and Enabled.
Port 61h bit-4 Emulation
Select Enabled to enable the emulation of Port 61h bit-4 toggling in SMM (System Management
Mode). The options are Disabled and
Enabled
.
PCIe PLL SSC
Enable this feature to reduce EMI interference by down spreading clock 0.5%. Disable this
feature to centralize the clock without spreading. The options are
Disabled
and Enabled.
USB 3.1 Device
This setup item is used to Enable of Disable the onboard USB 3.1 device. The options are
Disabled and
Enabled
.
SATA Configuration
When this submenu is selected, the AMI BIOS automatically detects the presence of the SATA
devices that are supported by the Intel PCH chip and displays the following items:
SATA Controller(s)
This item enables or disables the onboard SATA controller supported by the Intel PCH chip.
The options are
Enabled
and Disabled.