manualshive.com logo in svg

Supermicro SuperStorageSystem SSG-2028R-DN2R24L, User Manual

Share
Download
Supermicro SuperStorageSystem SSG-2028R-DN2R24L User Manual Download Page 82

C-4

SUPERSTORAGESYSTEM SSG-2028R-DN2R24L User's Manual

6.  After the process of BIOS recovery is completed, press any key to reboot the 

system.

7. 

Using a different system, extract the BIOS package into a bootable USB flash 

drive.

8.  When a DOS prompt appears, enter FLASH.BAT BIOSname.### at the 

prompt. 

Note:

 

Do not interrupt this process

 until BIOS flashing is completed.

9.  After seeing the message that BIOS update is completed, unplug the AC 

power cable from the power supply to clear the CMOS, and then plug the AC 
power cable in the power supply again to power on the system.

10. Press <Del> continuously to enter the BIOS Setup utility. 
11. Press <F3> to load default settings. 
12. After loading default settings, press <F4> to save the settings and exit the 

BIOS Setup utility.

Note:

 

Do not interrupt

 the process of BIOS flashing until it is completed.  

Summary of Contents for SuperStorageSystem SSG-2028R-DN2R24L



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands