SuperStorage SSG-1129P-ACR10N4L User's Manual
22
Note:
Both front chassis rails and the rack rails have a locking tab, which serves two functions.
First, it locks the server into place when installed and pushed fully into the rack (its normal
operating position. In addition, these tabs lock the server in place when fully extended from
the rack. This prevents the server from coming completely out of the rack when pulled out
for servicing.
Slide rail mounted equipment is not to be used as a shelf or a work space.
Figure 2-2. Assembling the Outer Rails
Outer Rail Assembled
Secure to the
Front of the Rack
Secure to the
Rear of the Rack
Slide Outer
Rails Together
Assembling the Sections
of the Outer Rail
Round Hole
Bracket with
Square Pegs
A
B
Assembling the Outer Rails
Each outer rail comes in two sections that must be assembled before mounting onto the rack.
Assembling the Outer Rails
1. Identify the left and right outer rails by examining the ends, which bend outward. Match
the left front outer rail with the left rear outer rail and the same for the right rails.
2. Align the round post in the rear rail (B) with the round hole at the end of the slot in the
front rail (A), and slide the front section into the rear section.
Warning:
do not pick up the server with the front handles. They are designed to pull
the system from a rack only.
