51
Chapter 3: Maintenance and Component Installation
Removing and Installing a Ruler Drive
Drives are installed and removed by extending a ruler from the chassis.
Extending a Ruler
1. Push the button at the top of the ruler up to pop out the handle.
2. Grasp the handle and latches and use them to extend the ruler out of the chassis.
Figure 3-6. Removing a Ruler
3. To reinstall the ruler, slide it back into the chassis until the handle retracts and the ruler
clicks to a stop, indicating is has been fully seated.
Button
Pull with handle
to extend ruler
Figure 3-5. Extending the Handle
