manualshive.com logo in svg

Supermicro SuperServer SYS-2029U-T Series, User Manual, Page: 135 / 181

Share
Download
Supermicro SuperServer SYS-2029U-T Series User Manual Download Page 135

Chapter 6: UEFI BIOS

135

• 

Legacy/UEFI/Dual Boot Order #6

• 

Legacy/UEFI/Dual Boot Order #7

• 

Legacy/UEFI/Dual Boot Order #8

• 

UEFI/Dual Boot Order #9

• 

Dual Boot Order #10

• 

Dual Boot Order #11

• 

Dual Boot Order #12

• 

Dual Boot Order #13

• 

Dual Boot Order #14

• 

Dual Boot Order #15

• 

Dual Boot Order #16

• 

Dual Boot Order #17

Delete Boot Option 

Use this feature to remove a pre-defined boot device from which the system will boot during 

startup. The options are 

Select one to Delete

 and UEFI: Built-in EFI Shell.

UEFI Application Boot Priorities

This feature allows the user to specify which UEFI devices are boot devices.

Boot Option #1 

The options are 

UEFI: Built-in EFI Shell

 and Disabled.

Network Drive BBS Priorities

This feature allows the user to specify which available network drives are boot devices.

Boot Option #1 

The options are 

IBA XE Slot 1800 v2358

 and Disabled.

Summary of Contents for SuperServer SYS-2029U-T Series






















































































































































































Reviews:

No comments