12
SuperServer E300-9D User's Manual
Quick Reference Table
Jumper
Description
Default Setting
JBT1
CMOS Clear
Open: Normal, Closed: Clear CMOS
JI
2
C1, JI
2
C2
SMB to PCI-E Slots Enable/Disable
Pins 2-3 (Disabled)
JNS1
OCuLink to 4x SATA or PCI-E x4 Selection
Pins 2-3: (PCI-E x4)
JPG1
Onboard VGA Enable/Disable
Pins 1-2 (Enabled)
JPME2
Manufacturing Mode Select
Pins 1-2 (Normal)
JWD1
Watch Dog Timer
Pins 1-2 (Reset)
LED
Description
Status
LED1
Power LED
Solid Green: Power On
LED2
UID LED
Solid Blue: Unit Identified
LED3
Overheat (OH)/PWR Fail/Fan Fail LED
Solid Red: Overheat
Blinking Red: PWR Fail or Fan Fail
LEDBMC
BMC Heartbeat
Blinking Green: BMC Normal
Connector
Description
BT1
Onboard Battery
FAN1 - FAN2, FANA
CPU/System Fan Headers
IPMI_LAN
Dedicated IPMI LAN Port
JD1
Speaker Header (Pins 1-4: Speaker)
JF1
Front Control Panel Header
JIPMB1
System Management Bus Header (for IPMI only)
JL1
Chassis Intrusion Header
JPI
2
C1
Power I
2
C System Management Bus (Power SMB) Header
JPH1
4-pin Power Connector for HDD use
JPV1
8-pin 12V DC Power Input (Required for both 12V only and 24-pin ATX power)
JSMB1
System Management Bus Header
JTPM1
Trusted Platform Module (TPM)/Port 80 Connector
JUIDB1
Unit Identifier Button
LAN1 - LAN2
10 Gigabit (RJ45) LAN Ports
P1_NVME0
OCuLink Connector (to 4x SATA or PCI-E x4)
PJ1
Header for ATX Power Signal 5VSTBY/Power ON/Power GOOD/Ground
(CBL-PWEX-1063)
S-SATA0 - S-SATA3
SATA 3.0 Ports
S-SGPIO1
Serial General Purpose I/O Header
SLOT7
PCI-E 3.0 x8 Slot
USB0/1
USB 2.0 Header
USB2/3
Back Panel USB 3.0 Ports
VGA
VGA Port
