40
SuperServer E200-8D User's Manual
Manufacturing Mode Select
Close JPME2 to bypass SPI flash security and force the system to use the Manufacturing
Mode, which will allow you to flash the system firmware from a host server to modify system
settings.
Manufacturing Mode
Jumper Settings
Jumper Setting
Definition
Pins 1-2
Normal (Default)
Pins 2-3
Manufacturing Mode
USB Wake-Up
Use the JPUSB1 jumper to enable the function of "System Waking-Up via USB devices"
for USB0/1. This jumper allows you to "wake-up" the system by pressing a key on the USB
keyboard or by clicking the USB mouse of your system. The JPUSB1 jumper is used together
with the USB Wake-Up function in the BIOS. Enable both the jumper and the BIOS setting
to enable this function.
USB Wake-up
Jumper Settings
Pin# Definition
1-2
Enabled (Default)
2-3
Disabled
Management Engine (ME) Recovery
Use JPME1 to select ME Firmware Recovery mode, which will limit resource allocation for
essential system operation only in order to maintain normal power operation and management.
In the single operation mode, online upgrade will be available via Recovery mode.
ME Recovery
Jumper Settings
Pin# Definition
1-2
Normal (Default)
2-3
ME Recovery
BIOS Recovery
Close pins 2 and 3 of jumper JBR1 for BIOS recovery. The default setting is on pins 1 and
2 for normal operation.
BIOS Recovery
Jumper Settings
Pin# Definition
1-2
Normal
2-3
BIOS Recovery
