18
SuperServer E100-9S/-9S-E/-9S-L User's Manual
1. The side clips will automatically secure the SODIMM module, locking it into place.
Locking clip
SODIMM Removal
1. Push the side clips at the end of slot to release the SO-DIMM module.
2. Pull the SO-DIMM module up to remove it from the slot.
Solid State Storage
The E100-9S/-9S-E/-9S-L motherboard deploys a B-KEY for SATA/PCIe SSD devices or USB/
PCIe WWAN or GNSS card. The E100-9S/-9S-E/-9S-L deploys a 2280 screw hole location
for an M.2 module.
Installing the M.2 Card
1. Gently insert the M.2 card into the connector.
2. Use a screw to secure the M.2 card to the M2_SRW1 standoff.
Figure 2-2. Installing an M.2 Expansion Card
Motherboard Battery
The motherboard uses non-volatile memory to retain system information when system power
is removed. This memory is powered by a lithium battery residing on the motherboard.