SuperStorageServer 6049P-E1CR45H/L/L+ User's Manual
42
Installing Expansion Cards
The system can accommodate three PCI-E 3.0 expansion cards.
Installing an Expansion Card
1. Power down the system as described in Section 3.1.
2. Open the storage compartment top cover.
3. Remove the two-fan housing from the chassis rear (described in later section).
4. Remove the blank PCI shield from the chassis rear.
5.
Plug the expansion card into the PCI slot on the motherboard while fitting card bracket
into the rear chassis slot.
6. Secure the expansion card bracket into the chassis slot with a screw.
7. Replace the fans and covers.
Figure 3-5. Motherboard Tray
(shown without chassis for illustration only)