39
Chapter 3: Maintenance and Component Installation
Removing a Drive from a Drive Carrier
1. Remove the screws that secure the hard drive to the carrier and separate the hard drive
from the carrier.
2. Replace the carrier back into the drive bay.
Hard Drive Carrier Indicators
Each hard drive carrier has two LED indicators: an activity indicator and a status indicator. In
RAID configurations, the status indicator lights to indicate the status of the drive. In non-RAID
configurations, the status indicator remains off.
DVD-ROM Drive Installation
The 6039P-TXRT accommodates only slim DVD drives. Side mounting brackets are needed
to install a slim DVD drive in the chassis.
Accessing a DVD-ROM Drive
Begin by removing power from the system as described in Section 3.1.
1. Unplug the power and data cables from the drive.
2. Locate the locking tab at the rear of the drive. It will be on the left side of the drive when
viewed from the front of the chassis.
Figure 3-10. Installing a Hard Drive to a Carrier
