Supermicro SUPERSERVER 6023L-8R, User Manual

Page: 64 / 110

6-2
S
UPER
S
ERVER 6023L-8R Manual
Figure 6-1. Chassis: Front and Rear Views
System Reset
6-2 Control Panel
The control panel (located on the front of the chassis) must be connected
to the JF1 connector on the motherboard to provide you with system status
indications. A ribbon cable has bundled these wires together to simplify the
connection. Connect the cable from JF1 on the motherboard to JP4 on the
Control Panel PCB (printed circuit board). Make sure the red wire plugs into
pin 1 on both JF1 and JP4. Pull all excess cabling out of the airflow path.
The LEDs inform you of system status. See Chapter 3 for details on the
LEDs and the control panel buttons. Details on JF1 can be found in Chapter
5.
Control Panel/System LEDs Main Power
Slim-Line CD-ROM Drive Floppy Drive
SCSI Drives (6)
5 1/4" Drive Bay
Power Supplies (2)
Full-sized PCI Slots (3)
Mouse/Keyboard
Ports
USB Ports
COM1 Port
VGA Port
LAN Ports External SCSI Port
Printer Port