Supermicro SuperServer 6017R-WTRFTP, User Manual

Page: 11 / 128

1-3
Chapter 1: Introduction
1-3 Server Chassis Features
The 6017R-WTRFTP is built upon the SC819TQ-R700WB chassis. Details on the
chassis and on servicing procedures can be found in Chapter 6.The following is a
general outline of the main features of the chassis.
System Power
The SC819TQ-R700WB features a redundant 700W power supply consisting of
two power modules. The system does not need to be shut down when replacing or
removing a single power supply module.
Hard Drives
The SC819TQ-R700WB chassis was designed to support four hot-swap SATA
hard drives.
PCI Expansion Slots
Two riser cards are included. The RSC-R1UW-2E16-O-P supports one standard size
PCI-E 3.0 x16 card and one standard size PCI-E 3.0 x8 card. The RSC-R1UW-E8R-
O-P supports one low-profile PCI-E 3.0 x8 add-on card. See our website (http://www.
supermicro.com/products/nfo/UIO.cfm) and section 5-6 of this manual for details.
Front Control Panel
The chassis' control panel provides you with system monitoring and control. LEDs
indicate system power, HDD activity, network activity (2), overheat/fan/power failure
and system information. A main power button and a UID button is also included.
Cooling System
The SC819TQ-R700WB has an innovative cooling design that features five sets of
4-cm counter-rotating fans located in the middle section of the chassis. Fan speed
may be determined by IPMI. The power supply module also includes a cooling fan.