Supermicro SUPERSERVER 6015A-NT, User Manual

Page: 13 / 122

1-3
Chapter 1: Introduction
Other Features
Other onboard features that promote system health include onboard voltage moni-
tors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU
overheat sensors, virus protection and BIOS rescue.
1-3 Server Chassis Features
The 6015A-NT is built upon the SC815TQ-560U chassis. The following is a general
outline of the main features of the chassis.
System Power
The SC815TQ-560U features a single 560W power supply module. The system
must be shut down when replacing or removing this power supply module.
SATA Subsystem
The SC815TQ-560U chassis was designed to support four hot-swap SATA hard
drives. Note: SATA drives are connected to the onboard SATA ports.
PCI Expansion Slots
A riser card on the right side of the chassis can support either one PCI-X card or
one PCI-E x8 card. The left side supports one PCI-E x16 card. See section 5-6 for
details. (Right and left refer to the side when viewed from the front of the system.
The 6015A-NT does not support a UIO card.)
Front Control Panel
The chassis' control panel provides you with system monitoring and control. LEDs
indicate system power, HDD activity, network activity (two) and UID/overheat/fan
fail/power fail. A main power button and system reset button is also included.