Supermicro SUPERSERVER 6014H-32, User Manual

Page: 60 / 126

6-4
S
UPER
S
ERVER 6014H-32 User's Manual
Figure 6-2. System Cooling Fans (with optional front bezel shown)
6-4 Drive Bay Installation/Removal
Removing the Front Bezel
If your system has a front bezel (optional) attached to the chassis, you must fi rst
remove it to gain access to the drive bays. To remove the bezel, fi rst unlock the
front of the chassis then press the release knob (see Figure 6-3). Carefully re-
move the bezel with both hands. A fi lter located within the bezel can be removed
for replacement/cleaning. It is recommended that you keep a maintenance log of
fi lter cleaning/replacement, since its condition will affect the airfl ow throughout the
whole system.
10-cm Blower Fans