SuperServer 5019S-W4TR User's Manual
30
Note:
Visit the product page on the Supermicro website for possible updates to memory
Memory Module Size
Max Memory
Possible
4GB DRAM
Technology
8GB DRAM
Technology
Single Rank
UDIMM
16GB
(4x 4GB DIMMs)
32GB
(4x 8GB DIMMs)
Dual Rank
UDIMMs
32GB
(4x 8GB DIMMs)
64GB
(4x 16GB DIMMs)
Order of Memory Module Population
Number of DIMMs DIMM Slots to be Populated
2 DIMMs
DIMMB2/DIMMA2
4 DIMMs
DIMMB2/DIMMA2, DIMMB1/DIMMA1
Memory Module Type
DIMM Slots
per Channel DIMM Type
POR Speeds
Ranks per
DIMM
Layer
Count
FW Base
Supported
Voltage
2
Unbuffered
DDR4 ECC
2400, 2133,1866,
1600, 1333
SR, DR
6
SPS
1.2V
PCI Expansion Card Installation
The system includes a pre-installed riser card (RSC-W-68), which supports two PCI-E x8 or
one PCI-E x16 cards (with a jumper, see following page). Riser cards position the expansion
cards at a 90 degree angle, allowing them to fit inside the 1U chassis.
Installing PCI Expansion Cards
The riser card has already been pre-installed into the motherboard. Perform the following
steps to install an add-on card:
Begin by removing power from the system as described in section 3.1.
1. Remove the chassis cover to access the inside of the system.
2. Remove the PCI slot shield on the chassis by releasing the locking tab.
3. Insert the expansion (add-on) card into the riser card.
4. Secure the card with the locking tab.
