Chapter 6: BIOS
81
Above 4GB MMIO BIOS Assignment
Select Enabled to decode a PCI device that supports 64-bit in the space above 4G Address.
The options are Enable and
Disabled
.
SR-IOV Support
Use this feature to enable or disable Single Root IO Virtualization support. The options are
Disabled
and Enabled.
VGA Priority
Use this feature to select VGA priority when multiple VGA devices are detected. Select On-
board to give priority to your onboard video device. Select Offboard to give priority to your
graphics card. The options are
Onboard
and Offboard.
NVMe Firmware Source
Use this feature to select the NVMe firmware to support booting. The options are
Vendor
Defined Firmware
and AMI Native Support. The default option, Vendor Defined Firmware,
is pre-installed on the drive and may resolve errata or enable innovative functions for the
drive. The other option, AMI Native Support, is offered by the BIOS with a generic method.
PCIe/PCI/PnP Configuration
RSC-W-68 SLOT1 PCI-E 3.0 x16 OPROM / RSC-W-68 SLOT2 PCI-E 3.0 x8 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled,
Legacy
, and EFI.
RSC-R1UW-E8R SLOT1 PCI-E x8 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled,
Legacy
, and EFI.
M.2-H_1 / M.2-P_2 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled,
Legacy
, and EFI.
Onboard LAN Option ROM Type
Use this feature to select which firmware type to be loaded for onboard LAN ports. The
options are
Legacy
and EFI.
*If the feature above is set to Legacy, the following LAN ports will be listed and become
available for configuration:
Onboard LAN1 ~ LAN2 Option ROM
Use this feature to select which firmware function to be loaded for the specified onboard LAN
port at system boot. The options are
Disabled
,
PXE, and iSCSI*.
