15
Chapter 1: Introduction
Quick Reference Table
Jumper
Description
Default Setting
JBT1
CMOS Clear
Open (Normal)
JPAC1
Audio Enable/Disable
Pins 1-2 (Enable)
JPG1
BMC Video Enable/Disable
Pins 1-2 (Enable)
JPL1/JPL2
LAN1/LAN2 Enable/Disable
Pins 1-2 (Enable)
JPME2
Manufacturing Mode
Pins 1-2 (Normal)
JPT1
Onboard TPM2.0 Enable/Disable
Pins 1-2 (Enable)
JRF1
PCI-E Slot 6
x16/x8x8 Bifurcation
Pins 1-2 (x16 lane)
JWD1
Watch Dog Timer
Pins 1-2 (Reset)
Connector
Description
AUDIO
High Definition Audio Ports on the I/O back panel
AUDIO FP
Front Panel Audio Header
BT1
Onboard Battery
COM1/2, COM3/4
RS-232 Serial COM Headers
DP++1/2
DisplayPorts
DVI-I
Digital Visual Interface Port supporting both digital and analog signals
FAN1 - FAN4, FANA, FANB
Fan Headers where FAN1 is the CPU Fan
IPMI LAN
Dedicated IPMI LAN Port
I-SATA0 - I-SATA4
Intel® PCH SATA 3.0 Ports where I-SATA0 is a SuperDOM connector
I-SGPIO1
Serial Link General Purpose I/O Header
J18
Extended CMOS Battery Connector
JD1
Speaker/Buzzer with Pins 1-4 for the speaker and Pins 3-4 for the buzzer
JF1
Front Control Panel Header
JGP1
General Purpose I/O Header
JIPMB1
System Management Bus Header for an IPMI card
JL1
Chassis Intrusion Header
JMD1
M.2 M-Key PCI-E 3.0 x4 or SATA 3 Connector
JPI2C1
Power Supply SMBus I
2
C Header
JPH1
4-pin Power Connector for HDD
JPV1
8-pin CPU Power Connector for ATX Power (required) or single 12V DC power for a special
enclosure when 24-pin ATX power is not in use
JPW1
24-pin ATX Power Connector
JPWR1
4-pin 12V Power Connector for GPU card requiring extra 12V power up to 75W
Note:
The Quick Reference table continues on the next page.
