14
SuperServer 5019A-FN5T User's Manual
Quick Reference Table
Jumper
Description
Default Setting
JBR1
BIOS Recovery
Pins 1-2 (Normal)
JBT1
CMOS Clear
Open (Normal)
JI
2
C1/JI
2
C2
SMB to PCIe Slots Enable/Disable
Pins 1-2 (Enabled)
JNCSI1
IPMI Shared LAN Port Selection
ON (short): LAN1, OFF (open): LAN2
JPG1
Onboard VGA Enable/Disable
Pins 1-2 (Enabled)
JPL1
LAN1 GbE Enable/Disable
Pins 1-2 (Enabled)
JPME2
ME Manufacturing Mode
Pins 1-2 (Normal)
JPTG1
LAN2/3/4/5 10GbE Enable/Disable
Pins 1-2 (Enabled)
JSEL1
PCIe Slot Selection
Pins 1-2: Slot 7, Pins 2-3: Slot 6
JWD1
Watch Dog Timer
Pins 1-2 (Reset)
LED
Description
Status
LED1
Power LED
Solid Green: Power On
LEDBMC
BMC Heartbeat
Blinking Green: BMC Normal
UIDLED1
UID LED
Solid Blue: Unit Identified
Connector
Description
BT1
Onboard Battery
COM1
COM Port (on the I/O back panel)
COM2
COM Header
FAN1 - FAN4, FANA, FANB
System Fan Headers
IPMI_LAN
Shared IPMI LAN Port (Default: shared with LAN1)
I-SATA0-1
Intel® PCH SATA 3.0 Ports (I-SATA0: SuperDOM)
JD1
Speaker Header (Pins 1-4: Speaker)
JF1
Front Control Panel Header
JGP1
General Purpose I/O Header
JIPMB1
System Management Bus Header (for IPMI only)
JL1
Chassis Intrusion Header
JMD1
M.2 B-Key PCIE3/SATA3/USB3 Connector
JMD2
M.2 M-Key PCIE3/SATA3 Connector
JPI
2
C1
Power Supply SMBus I
2
C Header
JPH1
4-pin Power Connector for HDD use
JPW1
24-pin ATX Power Connector
JPV1
4-pin 12V DC Power Connector (To provide alternative power for a special enclosure when
the 24-pin ATX power is not in use.)
JRT3
Thermal Diode 1
JRT4
Thermal Diode 2
