SuperServer 4029GP-TRT/TRT2/TRT3 User's Manual
84
2X Refresh
Select Enable for memory 2X refresh support to enhance memory performance. The options
are Enable and
Auto
.
Page Policy
Use this feature to set the page policy for onboard memory support The options are Closed,
Adaptive and
Auto
.
IMC Interleaving
Use this feature to configure interleaving settings for the IMC (Integrated Memory
Controller), which will improve memory performance. The options are 1-way Interleaving,
2-way Interleaving, and
Auto
.
Memory Topology
This item displays the information of onboard memory modules as detected by the
BIOS.
•
P1 DIMMA1/P1 DIMMA2/P1 DIMMB1/P1 DIMMC1/P1 DIMMD1/P1 DIMMD2/P1
DIMME1/P1 DIMMF1/
•
P2 DIMMA1/P2 DIMMA2/P2 DIMMB1/P2 DIMMC1/P2 DIMMD1/P2 DIMMD2/P2
DIMME1/P2 DIMMF1
Memory RAS (Reliability_Availability_Serviceability) Configuration
Use this submenu to configure the following Memory RAS settings.
Static Virtual Lockstep Mode
Select Enable to support Static Virtual Lockstep mode to enhance memory performance.
The options are Enable and
Disable
.
Mirror Mode
Use this feature to configure the mirror mode settings for all 1LM/2LM memory modules
installed in the system which will create a duplicate copy of data stored in the memory to
increase memory security, but it will reduce the memory capacity into half. The options are
Disable
, Mirror Mode 1LM, and Mirror Mode 2LM.
UEFI ARM Mirror
If this feature is set to Enable, mirror mode configuration settings for UEFI-based Address
Range memory will be activated upon system boot. This will create a duplicate copy of data
stored in the memory to increase memory security, but it will reduce the memory capacity
into half. The options are
Disable
and Enable.
