Supermicro SUPERSERVER 2028TP-DNCFR, User Manual

Page: 12 / 140

1-2
SUPERSERVER 2028TP-DNCR/DNCTR/DNCFR User's Manual
1-2 Serverboard Features
At the heart of the SuperServer 2028TP-DNCR/DNCTR/DNCFR lies the
X10DRT-P/PT/PIBF, a dual processor serverboard based on the Intel®
PCH C612 chipset and designed to provide maximum performance. Two of these
serverboards can be mounted in the -R1K68B chassis.
The sections below cover the main features of the X10DRT-P/PT/PIBF serverboard
(see Figure 1-1 for a block diagram of the chipset).
Processors
The X10DRT-P/PT/PIBF supports single or dual Intel® Xeon® E5-2600 v3 series
processors (Socket R LGA 2011). Please refer to the serverboard description pages
on our website for a complete listing of supported processors (www.supermicro.
com).
Memory
The X10DRT-P/PT/PIBF has sixteen DIMM slots supporting up to 1024 GB
of LRDIMM (Load Reduced DIMM) or 512 GB of RDIMM (Registered DIMM)
DDR4-2133/1866/1600 MHz registered ECC memory. See Chapter 5 for details.
Note: Check the Supermicro website (www.supermicro.com) for the latest memory
support information.
SAS/SATA/NVMe
For each serverboard, an LSI 3008 controller is integrated into the backplane to
provide eight SAS3 ports, four NVMe ports, one mSATA port and one SATADOM
port. RAID 0, 1 and 10/1E are supported and the drives are hot-swappable.
Each node supports up to eight SAS3/SATA3 HDD/SSD and four NVMe devices.
PCI Expansion Slots
The SuperServer 2028TP-DNCR/DNCTR/DNCFR can accommodate two low-
profile expansion cards.
Onboard Controllers/Ports
An Intel i350 Gigabit (10/100/1000 Mb/s) Ethernet dual-channel controller is included
on the X10DRT-P and X10DRT-PIBF. The X10DRT-PT has an Intel X540 10 Gigabit
Ethernet dual-channel controller. A Connect-X3 port for InfiniBand (on), which
supports a single QSFP connector, is provided on the the X10DRT-PIBF only. The
I/O ports include a VGA (monitor) port, two USB 3.0 ports (additional one internal