Supermicro SuperServer 120H-TNR User Manual Download Page 92

Page: 92 / 128

Chapter 7: Troubleshooting and Support

7.1 Information Resources

Website

A great deal of information is available on the Supermicro website,

supermicro.com

•

Specifications for servers and other hardware are available by clicking the menu icon, then

selecting the

Products

option.

•

The

Support

option offers downloads (manuals, BIOS/BMC, drivers, etc.), FAQs, RMA,

warranty, and other service extensions.

Direct Links for the 120H-TNR System

SYS-120H-TNR

specifications page

X12DHM-6 motherboard page

for links to the Quick Reference Guide, User Manual, validated

storage drives, etc.

Direct Links for General Support and Information

Frequently Asked Questions
TPM User Guide

General Memory Configuration Guide:

X12

SuperDoctor5 Large Deployment Guide

For validated memory, see our

Product Resources page

Figure 7-1. Supermicro Website

Chapter 7

Troubleshooting and Support

Menu Icon

Summary of Contents for SuperServer 120H-TNR

































































































































Search results

Summary of Contents for SuperServer 120H-TNR

Reviews:

Related manuals for SuperServer 120H-TNR

Brands by name

Popular brands

Supermicro SuperServer 120H-TNR, User Manual

Search results

Summary of Contents for SuperServer 120H-TNR

Reviews:

Related manuals for SuperServer 120H-TNR

Brands by name

Popular brands